MAC Quantum Wash [30ea]
- Bright and perfect RGBW LED wash light for demanding applications
- Quick 1:5 zoom for tight beams and even washes
- Unique and expressive Colorganics™ system
- Highly efficient optical system
- Eye-candy Aura Effect™
- Beamtwister effects via rotating front lens
- Very low weight and compact design
- Super high-speed movements and effects
- Physical
Length: 452 mm (17.8 in.)
Width (across yoke): 431 mm (17 in.)
Height (maximum): 581 mm (22.9 in.)
Height (head straight up): 511 mm (20.1 in.)
Weight: 21 kg (46.3 lbs.)
- Dynamic Effects
Color mixing: RGBW
Beam effects: Beam twister, light and color morphing, color spin
'Color wheel' effect: 36 solid colors plus white, variable-speed 'color wheel rotation'
effect and random color
Color ring effects: 36 split ring colors with variable-speed color wheel rotation effects
Shutter effect: Electronic, with variable speed regular and random strobe
Pre-programmed effects: Range of synchronized and independent color, intensity,
beam twister and zone effects
Electronic dimming: Four dimming curve options
Color temperature control: Variable 2000 - 10 000 K
Zoom: Motorized
Pan: 540°
Tilt: 270°
Pan and tilt speed: Adjustable via onboard control panel and DMX
- Control and Programming
Control system: DMX
Control options: Independent control of color ring/beam zones
Macro programs selectable via DMX: Range of synchronized and independent color,
intensity, beam twister and zone effects
RDM: Implemented
Control resolution: 8-bit, with 16-bit control of pan, tilt, dimming and lens rotation
DMX channels: 33/17
Setting and addressing: Control panel with backlit graphic display
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: RS-485
Fixture software update: USB memory device or USB/DMX hardware interface over
DMX link
- Optics
Light source: 50 x 15 W RGBW LEDs
LED refresh rate: Beam 3000 Hz, Aura 3000 Hz
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Zoom range: 11–53° (1:5)
Output: 16 000 lm
*Figure obtained under manufacturer´s test conditions:
- Construction
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20
- Installation
Mounting points: 2 pairs of 1/4-turn locks
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 0.2 m
Minimum distance to illuminated surfaces: 2.0 m
- Connections
AC power input: Neutrik PowerCon
DMX and RDM data in/out: 5-pin locking XLR
- Electrical
AC power: 120-240 V nominal, 50/60 Hz
Maximum total power consumption: 1020 W
Power supply unit: Auto-ranging electronic switch mode
Typical power consumption, all effects static, zero light output: Approx. 50 W
Typical half-cycle RMS inrush current: 10.3 A
- Typical Power and Current
120 V, 60 Hz: 7.4 A, 880 W, PF 0.999
208 V, 60 Hz: 4.2 A, 860 W, PF 0.995
230 V, 50 Hz: 3.8 A, 856 W, PF 0.993
240 V, 50 Hz: 3.7 A, 858 W, PF 0.992
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a
deviation of +/- 15%.:
Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.): 40° C
Minimum ambient temperature (Ta min.): 5° C
Max. total heat dissipation (calculated, +/- 15%): 3480 BTU/hr.
MAC Quantum Wash [30ea]
Length: 452 mm (17.8 in.)
Width (across yoke): 431 mm (17 in.)
Height (maximum): 581 mm (22.9 in.)
Height (head straight up): 511 mm (20.1 in.)
Weight: 21 kg (46.3 lbs.)
Color mixing: RGBW
Beam effects: Beam twister, light and color morphing, color spin
'Color wheel' effect: 36 solid colors plus white, variable-speed 'color wheel rotation'
effect and random color
Color ring effects: 36 split ring colors with variable-speed color wheel rotation effects
Shutter effect: Electronic, with variable speed regular and random strobe
Pre-programmed effects: Range of synchronized and independent color, intensity,
beam twister and zone effects
Electronic dimming: Four dimming curve options
Color temperature control: Variable 2000 - 10 000 K
Zoom: Motorized
Pan: 540°
Tilt: 270°
Pan and tilt speed: Adjustable via onboard control panel and DMX
Control system: DMX
Control options: Independent control of color ring/beam zones
Macro programs selectable via DMX: Range of synchronized and independent color,
intensity, beam twister and zone effects
RDM: Implemented
Control resolution: 8-bit, with 16-bit control of pan, tilt, dimming and lens rotation
DMX channels: 33/17
Setting and addressing: Control panel with backlit graphic display
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Transceiver: RS-485
Fixture software update: USB memory device or USB/DMX hardware interface over
DMX link
Light source: 50 x 15 W RGBW LEDs
LED refresh rate: Beam 3000 Hz, Aura 3000 Hz
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
Zoom range: 11–53° (1:5)
Output: 16 000 lm
*Figure obtained under manufacturer´s test conditions:
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20
Mounting points: 2 pairs of 1/4-turn locks
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 0.2 m
Minimum distance to illuminated surfaces: 2.0 m
AC power input: Neutrik PowerCon
DMX and RDM data in/out: 5-pin locking XLR
AC power: 120-240 V nominal, 50/60 Hz
Maximum total power consumption: 1020 W
Power supply unit: Auto-ranging electronic switch mode
Typical power consumption, all effects static, zero light output: Approx. 50 W
Typical half-cycle RMS inrush current: 10.3 A
120 V, 60 Hz: 7.4 A, 880 W, PF 0.999
208 V, 60 Hz: 4.2 A, 860 W, PF 0.995
230 V, 50 Hz: 3.8 A, 856 W, PF 0.993
240 V, 50 Hz: 3.7 A, 858 W, PF 0.992
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a
deviation of +/- 15%.:
Cooling: Forced air (temperature-regulated, low noise, user-definable levels)
Maximum ambient temperature (Ta max.): 40° C
Minimum ambient temperature (Ta min.): 5° C
Max. total heat dissipation (calculated, +/- 15%): 3480 BTU/hr.