Brainstorm Electronics
SR-112
TC Distributor_1x12
TC Input Connector_XLR Female
TC Output Connectors_1 x DB-25 F (8 outputs - Tascam/Avid analog pin configuration), 2 x XLR M, 2 x 1/4” TRS
Input Signa_SMPTE/EBU Longitudinal Time Code
Output Signal_Waveform: switchable rise time: 1us (square); 25us (SMPTE); 50us (EBU)
Connectors_Time Code in: XLR Female (x 1) / Video Ref_BNC (x 1)
Time Code outputs:
DB25 (1x) - Tascam/Avid analog pin configuration: outputs 1-8
XLR Male (2x): outputs 9-10
1/4” jacks (2x) - TRS: outputs 11-12
Ethernet: RJ45 jack (x 1)
Power: 4 pin circular (x 2)
Power: 12VDC @ 5A
Dimensions_48.26 cm x 20.64 cm x 4.45cm
ROSENDAHL
MIF 4
SOURCE = LTC read LTC (SMPTE) timecode, display and convert into MTC/USB midi time code and regenerate LTC (SMPTE) timecode.
SOURCE = MIDI read MTC from MIDI input, display and convert into LTC (SMPTE) and regenerate MTC/USB midi timecode.
SOURCE = USB read MTC from USB, display and convert into LTC (SMPTE) and regenerate MTC/USB midi timecode.
SOURCE = GEN the timecode generator can be set up and started manually or remote controlled by MMC midi machine control comands.
FPS timecode standards are automatically detected and displayed by the four FPS LEDs (24, 25, 30 Frames Per Second, DF is SMPTE Drop Frame standard).
DISPLAY = TC shows timecode in hours, minutes, seconds and frames.
DISPLAY = UB SMPTE user bits, 8 nibbles shown hexadecimal.
DISPLAY = CAL informs about timecode speed. 29.97 non drop timecode for example is indicated by 30 FPS LED and calibration 0.9990.
DISPLAY = REF PAL or NTSC video syncs (576i, 480i) as well as HD tri-level syncs (720p, 1080i, 1080p) are automatically detected and displayed along with their frame rate.